Changes from 3.4.1 to 3.4.2

- Added support for the AC (fill pattern anchor corner) command
- Added support for the CT (chord tolerance) command
- Added color support in SVG output mode
- Added output module for JPG images (requires libjpeg)

Bug fixes:

- SVG output mode could not be selected on the commandline
- PDF and EPS modes were not always generating penwidth commands on pen changes
- Polygon mode was influencing the overall pen up/down state
- PM1 immediately after PM was not setting the new starting point correctly
- FT instructions did not store/recall hatch spacing and angle correctly
- X11 preview always used black for pen 1
- Polygon fill algorithm did not handle parallel bounding lines correctly,
  and could draw lines beyond the limits of the polygon in some cases.
- the commandline interpreter now handles mis-spelled or unknown long
  options gracefully (Serge Ivanchenko)
- PDF output was only about 1/3 the intended size
- handling of RO/IW was broken (again) for the unscaled case (no SC)
- PNG output was still using a fixed eight pen palette
- raster modes were limited to 15 pens due to restrictions of the internal
  picture buffer (higher pen numbers were either mapped to black or scaled
  to the accessible range, depending on output format)
- DXF output had leading whitespace in layer numbers (Patrice Pinel)
- EPS output still had oversized margins

Changes from 3.4.0 to 3.4.1

- Scale penwidths in raster modes to resolve the metric/pixelcount
  controversy in interpretation of the pen widths. (Gerhard Buergmann)
- Added support for BR and BZ (cubic bezier curves)
- Added Makefile template for Microsoft platforms, explicitly set binary
  i/o mode on the standard in/out channels on these systems (Bruce Lightner)
- Added support for character sets 9 (ISO reference) and 30-39 (western 
  european languages).
- Added support for fonts 173 and 205 (PS Math and Ventura Math).
- Added partial support for the SD and AD commands (font selection only). 
- X11 preview can be terminated by pressing any key on the preview window
  now (Yury Strelenko). The preview window is limited to the available screen
  size again, but if the drawing is larger than the screen, one can
  now pan about the window using the mouse. The preview image can be zoomed
  to twice the original resolution using mouse button 2. 
- Added test case spectrum.plt, donated by Yuri Strelenko, to hp-tests
- Added PDF output mode (requires libpdf)
- Added simple DXF output.
- Added output mode for XML/SVG.
- Improved Epson Esc/P2 output mode, now known to work with the Stylus 1520.
- Added description and templates for building on MS Windows using VisualC++
  and added output as Windows Enhanced Metafile (EMF) with printing and 
  preview support for this platform (Bengt-Arne Fjellner)  
- Added option 'no_ps' or 'N' to suppress reading of the PS (plot size)
  command - apparently some systems (CATIA) create files with bogus PS entries
  resulting in absurdly wide images. 

Bug fixes:
 
- Removed extraneous progress message in PCX output (leftover from debugging,
  pointed out by Francisco Filho)
- Removed the intensity plane from PCX output, as it is not needed anymore
  and appears to confuses some software.
- backspacing degree sign in charset 2 looked more like a tiny A
- NULL characters in labels were not ignored, causing incomplete labels
- the default 'hardware limits' introduced by the original author in
  3.2.0 (A4 with margins) were messing up the scaling and clipping.
  (Joe Green). This version defaults to A0 (1188x840mm) hardware limits.
- made OS/2 version compile again, updated makefile template for OS/2
  (Kazutaka Nishiyama) 
- reduced 'penwidth correction' in eps output (Yuri Strelenko)
- the effects of a previous RO or WU commands were not undone by the next
  IN command (Yuri Strelenko)
- The provided Unix manual page was outdated in several areas
- A pencolor (PC) command for pen 0 would cause hp2xx to abort with a spurious
  error message(Tyler Mitchell)
- Added x and y dpi to the TIFF header to placate certain viewers and plotters
  (Glen Barr)
- Dots in line definitions were drawn as very short lines (Andrew Bird)
- the optional parameters of a BP statement were interpreted as regular
  HPGL commands (causing strange error messages when there was a filename with 
  HPGL-like character sequence among them)
- reverted a change in the scaling mechanism for PS/IW. Geometry surrounded
  by whitespace should be positioned correctly again.  
- The trailing semicolon is now suppressed when reporting inline COmments.
- The Postscript BeginProcSet command lacked a colon (Bengt-Arne Fjellner).
- The count of ignored commands was reset to zero before the summary was
  printed.


Changes from 3.4.ALPHA6 to 3.4.0

Bug fixes:

- Added polygon mode support for CI
- Label characters from unsupported fonts are now replaced by their
  charset 0 equivalents instead of being replaced by blanks.
- Text was sometimes incorrectly clipped when IW was set
- Fixed a typo (missing parenthesis) in the Sun5 part of generic.mak
- Polygon fills were (again) miscalculated in some cases

Changes from 3.4.ALPHA5 to 3.4.ALPHA6

Bug fixes:

- The 'pen dot' feature was unnecessarily adding dots for the segments of 
  polylines as well
- PS command with height only and PS with width>height were not treated 
  correctly, rotation and scaling were applied twice due to code duplication
- small (cosmetic) corrections to the new linetype code (A. Bird)

Changes from 3.4.ALPHA4 to 3.4.ALPHA5

New features:

- New linetype handling including support for line types 7,8,-7,-8 and
  user-defined linetype (UL) (written by Andrew Bird)
- Support for the COmment keyword added (Andrew Bird)
- PD;PU-sequences without pen movement create a small dot now to mimick the
  behaviour of a real pen plotter. 

Bug fixes:

- lines drawn in IW mode had extraneous pen-up moves added, which confused 
  the line pattern generator.
- clipping (IW) was seriously broken by cleanup and prototyping efforts in
  ALPHA2/3. Thanks to Andrew Bird for finding and fixing this.

Changes from 3.4.ALPHA3 to 3.4.ALPHA4

New features:

- Added -S option for selection of TIFF compression mode (Andrew Bird)
- Rewrote pen property handling - a pen can now change width during a 
  plot (Andrew Bird). Similarly added pencolor changing support (though for
  the postscript driver only - all other modes require a rewrite of the 
  intermediate raster 'picbuf' code).
- Output mode 'esc2' for the Epson Stylus series of printers at 720dpi.
  (limited to A4 size for now, and in 'microweave' mode, i.e. using only
   one row of nozzles, which results in exact but very slow printing)

Bug fixes:

- auto-generation of output filenames sometimes failed (side effect of
  the less restrictive naming rules introduced in ALPHA2)
- removed extraneous asterisk in the INFO-DIR-ENTRY section of the
  texinfo doc file (Reinhard Kotucha)
- IW without parameters was assigned wrong values in some cases (bug
  introduced in ALPHA2)
- IW could clip lines just inside the limits due to rounding errors on
  some platforms
- changed PostScript 'translate' parameters to adjust plot position on page

 
Changes from 3.4.ALPHA2 to 3.4.ALPHA3

New features:

- added command line option '-n'/'--nofill' to suppress polygon filling  

Bug fixes:

- Updated all makefiles to include fillpoly.(c,o)
- Line pattern length was too long for LT-2
- SC scale factors were not applied to XT/YT tick marks, resulting in
  distorted plots
- Added a #define to support compiling on WinNT (mentioned, but not
  actually included in ALPHA2)

Changes from 3.4.ALPHA1 to 3.4.ALPHA2

New features:

- OS/2 PM previewer now has stderr output redirection to a separate window
  (patch provided by Kazutaka Nishiyama)
- Added step-by-step instructions for compiling on Windows NT (provided by
  James D. Shaw)
- X11 preview generates a warning, but no longer aborts if the window is
  larger than the current screen size 
- file names may start with non-alphabetic characters (e.g. numbers
  or unix-style path names) now (Michael Kennedy)
 
Bug fixes:

- deactivated the excessive debug output in the fill code (which could lead
  to huge temporary files)
- made the simple scanline algorithm a bit more robust (but it still gets out
  of step in a few pathological cases - which means that filled and unfilled
  sections will be reversed for the remainder of that line)
- enclosed all references to the unfinished Epson driver in #ifdefs, so that
  it is not built by default. (also fixed a few glaring bugs in the esc/p2 file
  header code, but the driver still does not work _at_all_)
- absolute PW pen widths between 0 and .1 were accidentally rounded to zero
  (invisible lines)
- the picture border was too wide in some cases (Gerhard Buergmann)


Changes from 3.3.2 to 3.4.ALPHA1

New features:

- Support for HPGL/2 commands related to polygons and area fills :
  EP, ER, FP, FT, PM, PT, RA, RR, WG (no user-defined fill types yet)
- WU command support, PW fixed accordingly.
- AT,RT command support (arc through three points)
- Initial (non-functional) version of an Epson Esc/P2 driver based on 
  to_pcl.
- Parser improved to be more robust (especially with PE commands),
  cliping (IW) support for PE lines, PJL and RTL control sequence handler,
  type 1 and 2 (anisotropic) scaling support added to SC (Eugene Doudine).
- Modified to_pcx to produce PCX mode 5 (truecolor) files in color mode,
  PCX2 in monochrome. (The old PCX2 module is in the 'old' directory, in 
  case this proves to be worse - i have changed a few of the palette 
  definitions to get correct b/w output and primary colors even with this 
  version).

Bug fixes:
- IW limits were interpreted as plotter units even if scaling (SC) was set.
- PCX output sometimes had dark red background in b/w mode and wrong colors
  in colormap mode (rewrote to_pcx.c for PCX5, see above).

Changes from 3.3.1 to 3.3.2

New features:

- Added TIFF output mode (provided by M.Liberi) based on libtiff. Uses ZIP
  deflate compression to avoid LZW patent issues at the risk of reduced
  portability.
- DV command (vertical text)

Bug fixes:

- Command line options for pen color and pen width take precedence over PC
  or PW statements in the HPGL file now. This allows creation of PBM bitmaps
  instead of PPM pixmaps from color plots again (by setting all pens to 
  black, -c11111111), and should also help for programs that use several pens 
  at constant widths, but emit global PW commands with every SP statement. 
  A true fix for the latter case would require keeping track of the current 
  pen settings for every line in the internal metaformat (maybe in 3.4)

- Removed the A4 size limitation for Encapsulated PostScript output 

- Default 20x20 plot size calculation was broken for Landscape format

- Black pen was displayed as light gray in X11 preview, now uses a very dark
  gray (gray10) 

- pen color was not decoded correctly in PE pencolor statements

- output file was closed twice in to_eps.c, which could cause a segmentation
  fault inside (g)libc if hp2xx was used in batch mode

Changes from 3.3.0 to 3.3.1

New features:
- PE with fractional coordinates (completes PE support)
- unlimited label lengths through dynamic reallocation of LB memory

Bug fixes:
- PS/RO handling was still broken, should be fixed now
- xfig file headers had erroneously claimed 3.2 compliance, but the files
  still had 3.1 format
- Makefiles in ~/makes updated 
- DR and DI did not initialize character properties when called without
  parameters
- Current address of Michael Schmitz added to documentation 
- removed leftover PCL file acad.pcl from hp-tests 

Changes from 3.3.ALPHA2 to 3.3.0

New features:
(none)

Bug fixes: 

- Combinations of PS, RO and the -r command line switch could lead to
  wrong scaling
- the position of a clipping box was miscalculated for labels

Changes from 3.3.ALPHA to 3.3.ALPHA2:

New features:

- the PS (plot size) command is now supported, allowing 'white space'
  around plots
- support for the EW (edge wedge) command

Bug fixes:

- PC support in 3.3.ALPHA was still limited to 8 colors
- PW had the parameters backwards and no provision for the 
  'set them all to this value' variant
- tick marks were scaled incorrectly (long-standing bug)
- EA advanced pen position (long-standing bug)

Changes from 3.2.0 to 3.3.ALPHA:

New features:

- Character set support for fonts 1-7, and the 'upper half' of font 0.
- Support for most character-related commands (CA,CS,SA,SS)
- Support for the IW (input window, i.e. clipping) command
- Partial support for the PE (polyline encoded) command (integer coords only)
- Output generation for Brian Smith's XFig
- Output generation for Gnuplot
- Output generation in PNG format
- Automatic medium size selection code in the PCL initialization sequence
- Centering (-C) now supported even in true-size (-t) mode
- HPGL/2 Pen Color and Pen Width support for up to 256 virtual pens

